⚙️ Usage

⚠️ Boot device on recovery mode on the tool then register the ECID

1️⃣ Connect your device in Recovery Mode.

2️⃣ Press DFU to enter DFU Mode, then disconnect the USB cable.

3️⃣ Connect your Raspberry Pi Pico 2 or Waveshare Board to get PWNED DFU.

4️⃣ Reconnect the device to the tool.

5️⃣ Click Boot Mode and you're done. ✅

━━━━━━━━━━━━━━━━━━

⚠️ Note

• Use a good-quality USB cable.

• Follow the steps in order.

• Supported devices and iOS versions only.

Fast • Stable • Reliable

🔧 Pico Firmware (One-Time Setup)

https://github.com/prdgmshift/usbliter8/releases

https://mega.nz/folder/QoxUxa7b#sNOtgvLp965P2O4sPew8UQ